Jun 05, 2026

How to Tie Converse Shoelaces?

To lace Converse shoes, hold one lace in each hand, pull both ends to equal length, create a base knot, form loops, wrap the lace around the loop base, push it through to create a second loop, pull both loops tight, secure with a double knot if needed, check the fit, and adjust the tension for comfort and support. Following these tying steps helps create balanced knot formation, secure lace tension, and reliable foot stability during everyday wear.

In addition to basic knot tying, Converse shoes support decorative lacing styles such as Star, Bar, Lattice, Criss Cross, Diamond, and Checkerboard, as well as specialized methods for High Top, Low Top, Knee High, Chuck Taylor, and slip-on models. Choosing the correct shoelace length for each Converse style and selecting suitable shoelaces, including Flat, Rope, Waxed, Reflective, and Leather laces, helps improve fit, comfort, lace security, appearance, and overall wearing performance while allowing greater customization.

9 steps to tie converse shoelaces include:

Hold One Lace in Each Hand
Pull Both Ends to Equal Length
Cross One Lace Over the Other and Pull Tight
Fold One Lace Into a Loop
Wrap the Other Lace Around the Base
Push It Through to Form a Second Loop
Pull Both Loops Tight
Tie a Double Knot for Extra Security
Check the Fit

Hold One Lace in Each Hand

Position one lace in each hand and choose your preferred Converse lacing style, such as criss-cross, straight bar, lattice, star, or a decorative pattern. Keep both lace ends even, pull the laces smoothly through the eyelets, and align the pattern carefully. Maintain balanced tension throughout to support comfort, a secure fit, and a clean appearance.

Pull Both Ends to Equal Length

Adjust both lace ends to equal length before tying your Converse shoes to create a balanced fit and neat appearance. Hold one lace in each hand and gently pull until both sides match evenly. If one end is longer, redistribute the excess lace through the eyelets. Equal lace lengths support a secure knot, consistent tension, and improved comfort while wearing your shoes.

Cross One Lace Over the Other and Pull Tight

Interlock one lace over the other to create a secure base knot before forming the bow. Pass one lace across the opposite lace, tuck it underneath, and pull both ends snug. Keep the tension balanced on both sides to support stability, comfort, and a reliable foundation for your preferred Converse shoelace knot.

Fold One Lace Into a Loop

Shape one lace into a small loop after creating the base knot. Hold the loop firmly between your fingers while guiding the other lace around the base of the loop. Pass the lace through the opening to form a second loop, then pull both loops evenly. Balanced tension helps create a secure bow, comfortable fit, and neat finish for your Converse shoes.

Wrap the Other Lace Around the Base

Guide the remaining lace around the base of the loop to form a secure, balanced knot. Keep the loop steady while circling the lace smoothly around its base, then pass it through the opening created. Pull both loops evenly to tighten the bow. Consistent tension helps keep your Converse laces secure, comfortable, and neatly arranged throughout the day.

Push It Through to Form a Second Loop

Insert the wrapped lace through the opening to form a second loop and complete the bow. Guide the lace carefully through the gap created near the base of the first loop, then pull both loops outward evenly. Balanced tension helps create a secure knot, a comfortable fit, and a neat appearance that stays in place throughout the day.

Pull Both Loops Tight

Tighten both loops evenly to secure the bow and keep your Converse shoelaces in place. Pull each loop outward simultaneously while maintaining balanced tension on both sides. Check that the loops are similar in size and the knot sits flat. Even tightening supports a secure hold, improved comfort, and a neat, symmetrical finish.

Tie a Double Knot for Extra Security

Reinforce the bow with a double knot to provide extra security and help prevent the laces from loosening during wear. Cross the two loops over each other, pass one loop under the other, and pull both loops firmly. Keep the tension even on both sides to create a stable knot that stays secure, comfortable, and neatly tied throughout the day.

Check the Fit

Assess the fit after tying your laces to ensure your Converse shoes feel secure and comfortable. Walk a few steps and check that your heel stays in place, your toes have enough room to move, and the laces apply even pressure across the foot. Adjust the lace tension as needed to achieve a balanced fit and reliable support throughout the day.

How to Lace Converse in Different Styles?

To lace Converse in different styles, use Star Lacing for a bold geometric pattern, Bar Lacing for a clean, streamlined look, Lattice Lacing for a woven design, Criss Cross Lacing for a classic, everyday fit, Diamond Lacing for a decorative, open pattern, and Checkerboard Lacing for a distinctive woven look. Each Converse lacing style offers a different combination of visual appeal, lace tension, foot comfort, and shoe personalization, depending on your preferences and wearing style.

How to Star Lace Converse?

To star lace Converse shoes, thread the laces through the lower eyelets and weave them diagonally across the tongue to create a star-shaped pattern. Continue crossing the laces through alternating eyelets while keeping the tension even to maintain a symmetrical design.

Thread the lace through the lower eyelets and pull both ends to equal length.
Cross the right lace diagonally to the opposite side to begin the first star point.
Weave the left lace across the tongue to form the next section of the star.
Continue crossing the laces through alternating eyelets to complete the star pattern.
Adjust the lace tension evenly to keep the design clear and balanced.
Secure or tuck the lace ends to finish the star-laced style.

How to Bar Lace Converse?

To bar lace Converse shoes, thread the laces straight across the eyelets to create clean horizontal bars across the shoe. Guide each lace end up inside the shoe and across to the opposite side, keeping the bars flat and evenly spaced for a neat, streamlined appearance.

Insert the lace straight across the bottom eyelets and pull both ends to equal length.
Guide one lace end up into the next eyelet on the same side.
Pass the lace straight across to the opposite eyelet to create the first bar.
Repeat the process with the opposite lace end, alternating sides as you move upward.
Align each horizontal bar evenly to maintain a clean and symmetrical pattern.
Secure the lace ends with a knot or hide them behind the tongue for a slip-on finish.

How to Lattice Lace Converse?

To lattice lace Converse shoes, weave the laces diagonally across the tongue to create a basket-weave pattern with alternating over-and-under crossings. Keep the laces flat and evenly tensioned throughout the process to maintain a neat, symmetrical lattice design.

Thread the lace straight across the bottom eyelets and pull both ends to equal length.
Cross the left lace diagonally to the opposite side, skipping one eyelet.
Mirror the pattern with the right lace by crossing it diagonally to the opposite side.
Raise each lace end through the next available eyelet on the inside of the shoe.
Weave the laces over and under previous crossings to build the lattice pattern.
Continue the diagonal weaving until both lace ends reach the top eyelets.
Fasten the laces with a bow or double knot to complete the lattice-laced style.

How to Criss Cross Lace Converse?

To criss-cross lace Converse shoes, thread the laces through the eyelets in an alternating diagonal pattern to create the classic X-shaped design. Maintain even tension as you work upward to achieve a secure fit, balanced pressure, and a clean everyday look.

Insert the lace straight across the bottom eyelets and pull both ends to equal length.
Cross the left lace over to the next eyelet on the opposite side.
Pass the right lace diagonally to the corresponding eyelet on the opposite side.
Repeat the alternating crossover pattern through each set of eyelets.
Balance the lace tension evenly from bottom to top for a comfortable fit.
Finish by tying a secure bow at the top to complete the criss-cross lacing style.

How to Diamond Lace Converse?

To diamond lace Converse shoes, weave the laces diagonally and horizontally across the eyelets to create a series of diamond-shaped patterns on the tongue. Keep the crossings evenly spaced and maintain consistent tension to achieve a clean, symmetrical, and decorative finish.

Thread the lace through the bottom eyelets and pull both ends to equal length.
Cross each lace diagonally to the third eyelet on the opposite side, skipping one eyelet.
Connect the laces through the next available eyelets to begin forming the diamond shapes.
Weave the laces diagonally and horizontally across the tongue to expand the pattern.
Adjust the lace tension regularly to keep the diamonds even and well-defined.
Continue the sequence until both lace ends reach the top eyelets.
Secure the laces with a bow, hidden knot, or tucked finish to complete the diamond-laced style.

How to Checkerboard Lace Converse?

To checkerboard lace Converse shoes, weave two contrasting laces horizontally and vertically through the eyelets to create a checkerboard pattern across the tongue. Keep the laces flat and evenly spaced to maintain a clean woven design and a distinctive slip-on appearance.

Guide the first lace horizontally across each row of eyelets to create parallel bars.
Position the second lace at the bottom of the shoe to begin the woven pattern.
Weave the second lace over and under the horizontal bars in an alternating sequence.
Continue the weaving pattern upward until the checkerboard design covers the tongue.
Adjust the laces regularly to keep the squares even and the weave tight.
Tuck or hide the lace ends inside the shoe for a clean, uninterrupted finish.
Complete the style by securing any remaining lace ends beneath the tongue or inside the shoe.

How to Lace Different Types of Converse?

To lace different types of Converse shoes, use High Top lacing for extra ankle support, Low Top lacing for a classic fit, Knee High lacing for customized coverage, Chuck Taylor lacing for a timeless look, and No-Tie lacing for easy slip-on wear. Each lacing style offers a different balance of comfort, support, security, and appearance based on the shoe type and personal preference.

How to Lace High Top Converse?

To lace High Top Converse shoes, use the classic criss-cross method for secure ankle support, the straight bar lacing for a clean, streamlined appearance, or the slip-on tuck method for easy wear and a hidden-lace finish. Each high-top lacing style offers a different combination of comfort, support, fit, and visual appeal based on your preference.

Thread the lace through the bottom eyelets and pull both ends to equal length.
Choose a criss-cross, straight bar, or slip-on tuck lacing pattern.
Guide the laces through each set of eyelets while maintaining even tension.
Continue the pattern until both lace ends reach the top eyelets.
Adjust the lace tension to achieve a comfortable and secure fit.
Finish by tying, tucking, or hiding the lace ends based on your preferred style.

How to Lace Low Top Converse?

To lace Low Top Converse shoes, use the criss-cross method for a secure, adjustable fit, or straight bar lacing for a clean, minimalist look. Each low-top lacing style offers a different balance of comfort, flexibility, shoe security, and visual appeal based on your preference.

Cross the lace through the bottom eyelets and pull both ends to equal length.
Select a criss-cross or straight bar lacing pattern.
Route the laces through the eyelets while keeping the tension even.
Continue the pattern until both lace ends reach the top eyelets.
Adjust the lace tightness to achieve a comfortable and secure fit.
Complete the style by tying a bow or tucking the lace ends for a slip-on finish.

How to Lace Knee High Converse?

To lace Knee High Converse shoes, use the criss-cross method for a classic adjustable fit or ladder lacing for added support and a structured appearance. Each knee-high lacing style offers a different balance of comfort, calf support, lace security, and visual appeal based on your preference.

Feed the lace through the bottom eyelets and pull both ends to equal length.
Choose a criss-cross or ladder lacing pattern.
Guide the laces through the eyelets while keeping them flat and evenly tensioned.
Continue the pattern through all eyelets until reaching the top of the shoe.
Adjust the lace tension around the foot, ankle, and calf for a secure fit.
Secure the lace ends with a bow, ankle wrap, or hidden tuck to complete the knee-high style.

How to Lace Converse Chuck Taylors?

To lace Converse Chuck Taylors, use the classic criss-cross method for a traditional fit, straight bar lacing for a clean appearance, or loose slip-on lacing for a relaxed feel. Each Chuck Taylor lacing style offers a different combination of comfort, shoe security, adjustability, and visual appeal.

Insert the lace through the bottom eyelets and pull both ends to equal length.
Select a criss-cross, straight bar, or loose lacing pattern.
Cross or align the laces through the eyelets, depending on your chosen style.
Continue the pattern evenly until both lace ends reach the top eyelets.
Balance the lace tension to achieve a comfortable and secure fit.
Finish with a bow, hidden knot, or tucked laces to complete the Chuck Taylor style.

How to Lace Converse Without Tying

To lace Converse without tying, use a slip-on lacing method that hides the lace ends behind the tongue for quick and convenient wear. This style creates a clean appearance while maintaining comfort, flexibility, and everyday practicality.

Loosen the laces across the eyelets to create enough space for easy foot entry.
Pass each lace end through the top eyelets from underneath.
Pull the lace ends inward to create slight slack and a comfortable fit.
Tie a small hidden knot behind the tongue using the extra lace.
Tuck the knot and remaining lace ends behind the tongue to keep them out of sight.
Test the fit by slipping your foot in and adjusting the lace tension as needed.

What Shoelace Length Do Converse Need?

To choose the right shoelace length for Converse shoes, use 45-inch laces for Low Top Converse, 63-inch laces for High Top Converse, and 90 to 120-inch laces for Knee High Converse. Each shoelace length provides the coverage needed for the number of eyelets, lace tension, shoe fit, and preferred lacing style, depending on the Converse model and wearing preference.

Low Top Shoelace Length: Low top Converse requires 45-inch (114 cm) laces. This length fits most low-top models and provides enough coverage for all eyelets while maintaining a comfortable fit.
High Top Shoelace Length: High top Converse requires 63-inch (160 cm) laces. This length accommodates the additional eyelets and provides sufficient lace coverage from the bottom to the top of the shoe.
Knee-High Shoelace Length: Knee-high Converse requires 90- to 120-inch (229 to 305 cm) laces. The exact length depends on the number of eyelets, usually between 15 and 20 or more, with longer laces needed to cover the full height of the shoe.

What Shoelaces Work Best for Converse?

To choose the best shoelaces for Converse, use Flat Laces for a classic look, Rope Laces for a casual style, Waxed Laces for durability, Reflective Laces for visibility, and Leather Laces for a premium finish. Each shoelace type offers a different combination of comfort, appearance, durability, and lace security, depending on your style preferences.

Flat Laces: Flat laces work best for Converse shoes when you want the traditional Converse look and fit. They are available in lengths such as 45 inches for Low Tops, 63 inches for High Tops, and 132 inches for Knee High models. Their flat profile sits neatly against the shoe and supports most standard lacing patterns.
Rope Laces: Rope laces work best for Converse shoes when you prefer a rounded, distinctive look. They are available in multiple lengths to fit different Converse models and eyelet counts. Selecting the correct length helps maintain proper lace coverage, balanced tension, and a secure fit across the entire shoe.
Waxed Laces: Waxed laces work best for Converse shoes when you want a cleaner, more controlled finish. The side holes support ventilation and alternative lacing styles, while excess lace can be tucked behind the tongue or under the insole. Regular cleaning with a damp cloth helps preserve their appearance and condition.
Reflective Laces: Reflective laces work best for Converse shoes when visibility and customization are important. The side holes on Converse improve airflow around the foot and create opportunities for alternative lacing arrangements. These additional eyelets support creative styling options while helping maintain comfort during extended wear throughout the day.
Leather Laces: Leather laces work best for Converse shoes when you want a refined, structured appearance. For a clean finish, tuck the lace ends beneath the insole or weave them back through interior eyelets. This approach keeps excess lace hidden, creates a tidy profile, and helps prevent loose ends.